Our company is a leading Parking System Boom Barrier Gate manufacturer, supplier and exporter in China. Adhering to the pursuit of perfect quality of Gate Barrier,It is widely used in highway toll stations and parking lot systems to manage vehicle passages and vehicle entry and exit.
Product Description
Features:
1. Control barrier gate by motor wheel
2. Automatic locking when power on or off
4. Balanced boom running with a motor transmission of cranks and shafts
5. Remote control to operate the barrier gate manually
6. Auto-reverse when the boom meets obstruction
7. Infrared photocells interface controller
8. Loop detector interface controller
9. Integrated with wire control (push button)
10. Interface for traffic light
11. Offering dry contact signal for car parking system (COM, NC,NO)
12. Auto-delay when closing (adjustable)
13. Wireless Remote control frequency: 418MHz, 433MHz
14. Boom with protective rubber band
General Detail:
1. Working temperature:-40~+75 degree centigrade.
2. Power: 220V±10%, 50/60HZ
3. Rated power: 80W
4. Relative humidity: ≤90%
5. Remote control distance: ≥30m
6. Net weight: 56kgs
7. Speed: 1.5S, 3S, 6S
8. Protection Class: IP54
Note: The above mentioned points are technical details for barrier gate (hardware) which is compatible to be integrated with access control software.
The electric barrier can be realized by wireless remote control alone, and it can also be automatically managed through the parking lot management system (ie IC card management system). The card is taken to release the vehicle when entering the venue, and the vehicle is automatically released after the parking fee is charged when leaving the venue.
Composition
The barrier is composed of a gearbox, a motor, (or hydraulic) transmission mechanism, a balancing device, a chassis, a brake lever bracket, and a brake lever.
Development Trend
With the continuous development of the automobile industry and the ever-increasing number of cars, the demand for barriers is also increasing, and higher requirements are put forward for the performance of barriers. Such as the integrated movement of the road gate, clutch device, intelligent anti-lift function, return device in case of resistance, heating function (to ensure use in an environment of minus 40 degrees), ventilation cooling system (to reduce the temperature of the motor in time), automatic clutch device, anti-collision De-rod device, etc. The rise and fall speed of the rod ranges from 0.8 seconds to 6 seconds. The pole length is 0-7 meters, depending on the actual channel width on site. Barriers have been increasingly developed to high-tech to meet market demand for products, and become key lane equipment in the management of parking systems.
Classification
• According to the performance of the control part, it is divided into: electromechanical barriers, digital barriers, and smart barriers. The smart barriers have LED display and voice broadcast functions.
• According to the gates, it is divided into: fence gates, straight pole gates, curved arm pole gates
• According to the landing speed: fast barriers, medium speed barriers, slow speed barriers
• According to the installation direction, it is divided into: left barrier gate, right barrier gate
Malfunction Repair
If your barrier has faults other than the following three types, it is recommended to ask a professional to repair it.
• Can't lift and drop
Elimination method: whether the measurement voltage is within the range of 220V±10V;
• Not in place, too much jitter
Detection reason: Check whether the operating switch magnet is adjusted well and whether the tension of the balance spring is too loose or too tight. Remedy: adjust the position of the stroke control and tighten the tension spring link bolt;
• Abnormal noise in the chassis
Detection reason: Check whether the bearing and active link part are abnormal. Remedy: add lubricating oil or replace bearing.
View More
